M8 X 50 RUBBER ANKERNUT 25.0-35.0MM WALL THICKNESS

The Ankernut is a synthetic rubber sleeve with a flange head and a brass threaded insert at the opposite end. They are mainly used in hollow base materials where the anchor can expand in the cavity. It is possible to use longer Ankernuts in solid material but a minimum embedment of 40mm is required.

Thread Diameter:  M8
Hole Diameter:  18mm
Wall Thickness:  25.0-35.0mm
Overall Length:  50mm
Flange thickness:  1.6mm
Flange Diameter:  20.0mm
Recommended Tightening Torque:  8Nm

There are no downloads for this product.