M12 X 75 RUBBER ANKERNUT 35.0-45.0MM WALL THICKNESS

The Ankernut is a synthetic rubber sleeve with a flange head and a brass threaded insert at the opposite end. They are mainly used in hollow base materials where the anchor can expand in the cavity. It is possible to use longer Ankernuts in solid material but a minimum embedment of 40mm is required.

Thread Diameter:  M12
Hole Diameter:  24mm
Wall Thickness:  35-45.0mm
Overall Length:  75mm
Flange thickness:  1.3mm
Flange Diameter:  27.0mm
Recommended Tightening Torque:  15Nm